Καινούριο PARKER PLANT RoadStar 1500
τιμή κατόπιν αιτήματος
Εργοστάσιο ασφάλτου
2021
Γερμανία, Finowfurt near Berlin
Καινούριο εργοστάσιο ασφάλτου MARINI Magnum 80 fully mobile asphalt plant
PDF
Μοιραστείτε
PDF
Μοιραστείτε
Επικοινωνία με τον πωλητή
Μάρκα
MARINI
Μοντέλο
Magnum 80 fully mobile asphalt plant
Τύπος
εργοστάσιο ασφάλτου
Έτος παραγωγής
2021
Ώρες εργασίας
1 ωρ./λειτ.
Τοποθεσία
Γερμανία Finowfurt near Berlin
Ημερομηνία καταχώρησης
Σεπ 30, 2021
Machineryline ID
WP2122
Περιγραφή
Δυναμικότητα
80 τόνος/ώρα
Κατάσταση
Κατάσταση
καινούριο
Εξ αποστάσεως επιθεώρηση
Ζητήστε την ανεξάρτητη τεχνική εμπειρογνωμοσύνη
Σημαντικό
Η παρούσα προσφορά έχει πληροφοριακό χαρακτήρα. Για λεπτομερείς πληροφορίες ρωτήστε τον πωλητή.
Συμβουλές αγοράς
Στοιχεία επικοινωνίας του πωλητή
BSS heavy machinery GmbH
Σε απόθεμα:
68 αγγελίες
Πωλητής στην Machineryline: 13 χρόνια
Οι αριθμοί τηλεφώνου ελέγχτηκαν
Παρόμοιες αγγελίες
Καινούριο PARKER PLANT RoadStar 1500
τιμή κατόπιν αιτήματος
Εργοστάσιο ασφάλτου
2021
Γερμανία, Finowfurt near Berlin
Καινούριο PARKER PLANT SRM 60
τιμή κατόπιν αιτήματος
Εργοστάσιο ασφάλτου
2021
60 τόνος/ώρα
Γερμανία, Finowfurt near Berlin
Καινούριο PARKER PLANT RoadStar 2000
τιμή κατόπιν αιτήματος
Εργοστάσιο ασφάλτου
2021
Γερμανία, Finowfurt near Berlin
Καινούριο STAINMANN Mobilnaya gruntosmesitelnaya ustanovka
τιμή κατόπιν αιτήματος
Εργοστάσιο ασφάλτου
2021
300 τόνος/ώρα
Γερμανία, Lahr/Schwarzwald
Καινούριο Sulphur additive Unit
τιμή κατόπιν αιτήματος
Εργοστάσιο ασφάλτου
01/2021
Γερμανία, Ettenheim
Καινούριο POLYGONMACH
τιμή κατόπιν αιτήματος
Εργοστάσιο ασφάλτου
2021
450 kW
Γερμανία




year: NEW
capacity: up to 80 t./h
1 year guarantee
- calorific power of the fuel 9,600 kcal / kg;
- material passing through the #8 (2,38mm) sieve is no more than 20%;
- The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system.
- Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support.
- Three cold feed bins with 7m3 each developed to hold charges during the cold material loading and provide a
better material flow .
- 50.8CM feeder belt with idle rollers diameter 10.6cm with permanent lubrication. The gear box is hooked
directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3hp electric motors.
- 60.96cm conveyor belt with idle rollers diameter 10.6cm , V shielded rollers actuated by a 5hp electric motor.
- Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins.
DRYER
- Feeding belts with 20" wide canvas supported by 4" rollers in "V" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor.
- Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by a 7.5hp electric motor.
- Sieve with a screen for eliminating oversized materials.
- Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp.
- rotational external mixer
- burner with fuel spraying by gear pump 10.000.000 Kcal/h
- Dry filtering system that consists of dust collecting system
- Control system Sistex
complete offer and details by request * more machines, mixing plants and trucks on our website προβολή επαφών
year: NEW
capacity: up to 80 t./h
1 year guarantee
- 3% weighted average of humidity in the aggregates;
- installation at sea level;
- calorific power of the fuel 9,600 kcal / kg;
- material passing through the #8 (2,38mm) sieve is no more than 20%;
- ambient temperature of 15°C to 20°C;
- The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system.
- Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support.
- Three cold feed bins with 7m3 each developed to hold charges during the cold material loading and provide a
better material flow .
- 50.8CM feeder belt with idle rollers diameter 10.6cm with permanent lubrication. The gear box is hooked
directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3hp electric motors.
- 60.96cm conveyor belt with idle rollers diameter 10.6cm , V shielded rollers actuated by a 5hp electric motor.
- Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins.
DRYER
- Feeding belts with 20" wide canvas supported by 4" rollers in "V" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor.
- Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by a 7.5hp electric motor.
- Sieve with a screen for eliminating oversized materials.
- Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp.
- rotational external mixer
- Terex CF04 burner with fuel spraying by gear pump 10.000.000 Kcal/h
- Dry filtering system that consists of dust collecting system
- Control system Sistex
complete offer and details by request * more machines, mixing plants and trucks on our website προβολή επαφών