Καινούρια γέφυρα φόρτωσης Saurus TELESCOPIC RAMP
Σας ενδιαφέρει η αγγελία;
1/14
3.800 €
Τιμή χωρίς ΦΠΑ
4.484 €
Τιμή με ΦΠΑ
Μάρκα:
Saurus
Μοντέλο:
TELESCOPIC RAMP
Τύπος:
γέφυρα φόρτωσης
Έτος παραγωγής:
2023
Χωρητικότητα φορτίου:
7000 κιλά
Καθαρό βάρος:
600 κιλά
Τοποθεσία:
Τουρκία KAHRAMANKAZAN/ ANKARA
Ημερομηνία καταχώρησης:
σήμερα
Forkliftonline ID:
WU15381
Περιγραφή
Συνολικές διαστάσεις:
2.5 μ × 2 μ × 0.6 μ
Κατάσταση
Κατάσταση:
καινούριο
Πρόσθετες πληροφορίες
Χρώμα:
πορτοκαλί
Χρειάζεστε παράδοση;
Υπολογισμός κόστους παράδοσης
Σημαντικό
Η παρούσα προσφορά έχει πληροφοριακό χαρακτήρα. Για λεπτομερείς πληροφορίες ρωτήστε τον πωλητή.
Συμβουλές αγοράς
Στοιχεία επικοινωνίας του πωλητή
SAURUS YÜKLEME SİSTEMLERİ MAK. SAN. VE TİC. LTD. ŞTİ.
Σε απόθεμα:
69 αγγελίες
5 χρόνια στο Forkliftonline
7 χρόνια στην αγορά
4.9
21 ανατροφοδοτήσεις
Οι αριθμοί τηλεφώνου ελέγχτηκαν
Η διεύθυνση ελέγχτηκε
Telescopic ramps are platforms that compensate for height differences between loading and unloading area at an average of +400 / -350 mm. With the help of telescopic flaps, which give the name of the ramp, the problem of the approaching of the vehicle to the loading area is solved. In addition, thanks to the electro-hydraulic system of them, telescopic flaps provide contact between two points easily. The difference of telescopic flaps from hinged ramps is the capability of reaching more away points. In order to be able to use the telescopic ramp, the site must have been built according to the ramp montage sizes or the site must be convenient to do necessary construction works.
• Design complies with EN 1398 and ANSI+MH30.1-2015
• CE certification
• SA2,5 quality sand blasting before painting
• RAL 9005 and RAL 2004 epoxy first layer and acyrilic finish layer
• Telescopic flap with a 500 mm extensibility
• Platform floor consists of 12/13 mm sheet with tear pattern
• Telescopic flap consists of 12/13 mm sheet with tear pattern
• Platform floor supported by two hydraulic piston
• Steel construction designed according to load distribution
• Protection sheet on sides of ramp
• Electro-hydraulic system
• Control panel
• Hydraulic emergency deceleration mechanism
• IP-55 protection class control panel
• Rubber bumper montaged on ramp walls
• St-37.2 material